Setting chart for G-Tape

Cardboard

Paper thickness	Creasing rule (mm)	G-Tape	Thickness	Creasing width
0.063-0.065mm GSM 50g	2pt (0.7) x 23.5	A-0308	0.3	0.8
0.22-0.23mm GSM 180g	2pt (0.7) x 23.4	A-0410	0.4	1.0
0.26-0.27mm GSM 200g	2pt (0.7) x 23.4	A-0412	0.4	1.2
0.29-0.30mm GSM 230g	2pt (0.7) x 23.4	A-0413	0.4	1.3
0.34-0.35mm GSM 270g	2pt (0.7) x 23.4	A-0414	0.4	1.4
0.39-0.40mm GSM 300g	2pt (0.7) x 23.3	A-0515	0.5	1.5
0.44-0.46mm GSM 350g	2pt (0.7) x 23.3	A-0516	0.5	1.6
	3pt (1.0) x 23.3	A-0519	0.5	1.9
0.50-0.52mm GSM 400g	2pt (0.7) x 23.2	A-0517	0.5	1.7
	3pt (1.0) x 23.2	A-0520	0.5	2.0
0.57-0.59mm GSM 450g	2pt (0.7) x 23.2	A-0519	0.5	1.9
	3pt (1.0) x 23.2	A-0522	0.5	2.2
0.63-0.65mm GSM 500g	2pt (0.7) x 23.2	A-0520	0.5	2.0
	3pt (1.0) x 23.2	A-0522	0.5	2.2
0.70-0.72mm GSM 550g	3pt (1.0) x 23.1	A-0624	0.6	2.4
	4pt (1.4) x 23.1	B-0627	0.6	2.7
0.76-0.78mm GSM 600g	3pt (1.0) x 23.0	A-0825	0.8	2.5
	4pt (1.4) x 23.0	B-0830	0.8	3.0

** This is standard setting. It might be needed to adjust sizes depending on paper material, dieboard and machine condition.

 

Corrugated board

Flute type	Creasing rule	3pt (1.0mm)	4pt (1.4mm)	6pt (2.0mm)	8pt (3.0mm)	Recommended creasing rule
G flute	Diecut from top side	*A-0622	B-0626			23.1x3pt
	Diecut from bottom side	*A-0624	B-0627
F flute	Diecut from top side	*A-0624	B-0627			23.0×3/4pt
	Diecut from bottom side	*A-0625	B-0630
E flute	Diecut from top side	A-0624	*B-0627	C-0832		23.0x4pt
	Diecut from bottom side	S-0627	*B-0630	C-0835
E flute (Topside cardboard)	Diecut from top side	A-0825	*B-0830	C-0835		23.0x4pt
	Diecut from bottom side	S-0630	*B-0632	C-0835
B flute	Diecut from bottom side	S-0830	*B-0835	C-0840	D-0950	23.0×4/6pt
C flute	Diecut from bottom side	S-0835	*B-0840	*C-0845	D-0855	22.8×4/6pt
A flute	Diecut from bottom side		B-0840	*C-1050	C-1060	22.8×6/8pt
FE double flute	Diecut from bottom side	*S-0727	*B-0732	C-0740	D-0750	23.1×3/4pt
EE double flute	Diecut from bottom side	S-0830	*B-0835	C-0840	D-0850	23.0×4/6pt
EB double flute	Diecut from bottom side		B-0840	*C-1050	D-1060	22.8×4-8pt
EC double flute	Diecut from bottom side		B-0845	*C-1050	D-1060	22.7×6/8pt
BC double flute	Diecut from bottom side		B-1045	*C-1050	*D-1060	22.2or22.3×6/8pt
AB double flute	Diecut from bottom side		B-1050	*C-1060	*D-1070	22.2×6/8pt

*Recommended size
**This is standard setting. It might be needed to adjust sizes depending on paper material, dieboard and machine condition.