DAISO | G-Tape creasing matrix

G-Tape setting calculation

Corrugated board

Please select flute type.

Flute type Creasing rule 3pt (1.0mm) 4pt (1.4mm) 6pt (2.0mm) 8pt (3.0mm) Recommended creasing rule
G flute Diecut from top side *A-0622 B-0626 23.1x3pt
Diecut from bottom side *A-0624 B-0627

* Thickness of G-Tape = thickness of compressed paper
* Crease width = thickness of compressed paper x 2.2 + thickness of creasing rule

*Recommended size
**This is standard setting. It might be needed to adjust sizes depending on paper material, dieboard and machine condition.

  • A type (2-3pt 0.7-1.0mm creasing rule, width 10mm)

     

     

  • B type (4pt 1.4mm creasing rule, width 15mm)

     

     

G-Tape (creasing matrix)

Flute type Creasing rule 3pt (1.0mm) 4pt (1.4mm) 6pt (2.0mm) 8pt (3.0mm) Recommended creasing rule
F flute Diecut from top side *A-0624 B-0627 23.0×3/4pt
Diecut from bottom side *A-0625 B-0630

* Thickness of G-Tape = thickness of compressed paper
* Crease width = thickness of compressed paper x 2.2 + thickness of creasing rule

*Recommended size
**This is standard setting. It might be needed to adjust sizes depending on paper material, dieboard and machine condition.

  • A type (2-3pt 0.7-1.0mm creasing rule, width 10mm)

     

     

  • B type (4pt 1.4mm creasing rule, width 15mm)

     

     

G-Tape (creasing matrix)

Flute type Creasing rule 3pt (1.0mm) 4pt (1.4mm) 6pt (2.0mm) 8pt (3.0mm) Recommended creasing rule
E flute Diecut from top side A-0624 *B-0627 C-0832 23.0x4pt
Diecut from bottom side S-0627 *B-0630 C-0835

* Thickness of G-Tape = thickness of compressed paper
* Crease width = thickness of compressed paper x 2.2 + thickness of creasing rule

*Recommended size
**This is standard setting. It might be needed to adjust sizes depending on paper material, dieboard and machine condition.

  • A type (2-3pt 0.7-1.0mm creasing rule, width 10mm)

     

     

  • B type (4pt 1.4mm creasing rule, width 15mm)

     

     

  • C type (6pt creasing rule, width 15mm)

     

     

  • S type (2-3pt creasing rule, width 15mm)

     

     

G-Tape (creasing matrix)

Flute type Creasing rule 3pt (1.0mm) 4pt (1.4mm) 6pt (2.0mm) 8pt (3.0mm) Recommended creasing rule
E flute (Topside cardboard) Diecut from top side A-0825 *B-0830 C-0835 23.0x4pt
Diecut from bottom side S-0630 *B-0632 C-0835

* Thickness of G-Tape = thickness of compressed paper
* Crease width = thickness of compressed paper x 2.2 + thickness of creasing rule

*Recommended size
**This is standard setting. It might be needed to adjust sizes depending on paper material, dieboard and machine condition.

  • A type (2-3pt 0.7-1.0mm creasing rule, width 10mm)

     

     

  • B type (4pt 1.4mm creasing rule, width 15mm)

     

     

  • C type (6pt creasing rule, width 15mm)

     

     

  • S type (2-3pt creasing rule, width 15mm)

     

     

G-Tape (creasing matrix)

Flute type Creasing rule 3pt (1.0mm) 4pt (1.4mm) 6pt (2.0mm) 8pt (3.0mm) Recommended creasing rule
B flute Diecut from bottom side S-0830 *B-0835 C-0840 D-0950 23.0×4/6pt

* Thickness of G-Tape = thickness of compressed paper
* Crease width = thickness of compressed paper x 2.2 + thickness of creasing rule

*Recommended size
**This is standard setting. It might be needed to adjust sizes depending on paper material, dieboard and machine condition.

  • B type (4pt 1.4mm creasing rule, width 15mm)

     

     

  • C type (6pt creasing rule, width 15mm)

     

     

  • D type (8pt creasing rule, width 15mm)

     

     

  • S type (2-3pt creasing rule, width 15mm)

     

     

G-Tape (creasing matrix)

Flute type Creasing rule 3pt (1.0mm) 4pt (1.4mm) 6pt (2.0mm) 8pt (3.0mm) Recommended creasing rule
C flute Diecut from bottom side S-0835 *B-0840 *C-0845 D-0855 22.8×4/6pt

* Thickness of G-Tape = thickness of compressed paper
* Crease width = thickness of compressed paper x 2.2 + thickness of creasing rule

*Recommended size
**This is standard setting. It might be needed to adjust sizes depending on paper material, dieboard and machine condition.

  • B type (4pt 1.4mm creasing rule, width 15mm)

     

     

  • C type (6pt creasing rule, width 15mm)

     

     

  • D type (8pt creasing rule, width 15mm)

     

     

  • S type (2-3pt creasing rule, width 15mm)

     

     

G-Tape (creasing matrix)

Flute type Creasing rule 3pt (1.0mm) 4pt (1.4mm) 6pt (2.0mm) 8pt (3.0mm) Recommended creasing rule
A flute Diecut from bottom side B-0840 *C-1050 C-1060 22.8×6/8pt

* Thickness of G-Tape = thickness of compressed paper
* Crease width = thickness of compressed paper x 2.2 + thickness of creasing rule

*Recommended size
**This is standard setting. It might be needed to adjust sizes depending on paper material, dieboard and machine condition.

  • B type (4pt 1.4mm creasing rule, width 15mm)

     

     

  • C type (6pt creasing rule, width 15mm)

     

     

G-Tape (creasing matrix)

Flute type Creasing rule 3pt (1.0mm) 4pt (1.4mm) 6pt (2.0mm) 8pt (3.0mm) Recommended creasing rule
FE double flute Diecut from bottom side *S-0727 *B-0732 C-0740 D-0750 23.1×3/4pt

* Thickness of G-Tape = thickness of compressed paper
* Crease width = thickness of compressed paper x 2.2 + thickness of creasing rule

*Recommended size
**This is standard setting. It might be needed to adjust sizes depending on paper material, dieboard and machine condition.

  • B type (4pt 1.4mm creasing rule, width 15mm)

     

     

  • C type (6pt creasing rule, width 15mm)

     

     

  • D type (8pt creasing rule, width 15mm)

     

     

  • S type (2-3pt creasing rule, width 15mm)

     

     

G-Tape (creasing matrix)

Flute type Creasing rule 3pt (1.0mm) 4pt (1.4mm) 6pt (2.0mm) 8pt (3.0mm) Recommended creasing rule
EE double flute Diecut from bottom side S-0830 *B-0835 C-0840 D-0850 23.0×4/6pt

* Thickness of G-Tape = thickness of compressed paper
* Crease width = thickness of compressed paper x 2.2 + thickness of creasing rule

*Recommended size
**This is standard setting. It might be needed to adjust sizes depending on paper material, dieboard and machine condition.

  • B type (4pt 1.4mm creasing rule, width 15mm)

     

     

  • C type (6pt creasing rule, width 15mm)

     

     

  • D type (8pt creasing rule, width 15mm)

     

     

  • S type (2-3pt creasing rule, width 15mm)

     

     

G-Tape (creasing matrix)

Flute type Creasing rule 3pt (1.0mm) 4pt (1.4mm) 6pt (2.0mm) 8pt (3.0mm) Recommended creasing rule
EB double flute Diecut from bottom side B-0840 *C-1050 D-1060 22.8×4-8pt

* Thickness of G-Tape = thickness of compressed paper
* Crease width = thickness of compressed paper x 2.2 + thickness of creasing rule

*Recommended size
**This is standard setting. It might be needed to adjust sizes depending on paper material, dieboard and machine condition.

  • B type (4pt 1.4mm creasing rule, width 15mm)

     

     

  • C type (6pt creasing rule, width 15mm)

     

     

  • D type (8pt creasing rule, width 15mm)

     

     

G-Tape (creasing matrix)

Flute type Creasing rule 3pt (1.0mm) 4pt (1.4mm) 6pt (2.0mm) 8pt (3.0mm) Recommended creasing rule
EC double flute Diecut from bottom side B-0845 *C-1050 D-1060 22.7×6/8pt

* Thickness of G-Tape = thickness of compressed paper
* Crease width = thickness of compressed paper x 2.2 + thickness of creasing rule

*Recommended size
**This is standard setting. It might be needed to adjust sizes depending on paper material, dieboard and machine condition.

  • B type (4pt 1.4mm creasing rule, width 15mm)

     

     

  • C type (6pt creasing rule, width 15mm)

     

     

  • D type (8pt creasing rule, width 15mm)

     

     

G-Tape (creasing matrix)

Flute type Creasing rule 3pt (1.0mm) 4pt (1.4mm) 6pt (2.0mm) 8pt (3.0mm) Recommended creasing rule
BC double flute Diecut from bottom side B-1045 *C-1050 *D-1060 22.2or22.3×6/8pt

* Thickness of G-Tape = thickness of compressed paper
* Crease width = thickness of compressed paper x 2.2 + thickness of creasing rule

*Recommended size
**This is standard setting. It might be needed to adjust sizes depending on paper material, dieboard and machine condition.

  • B type (4pt 1.4mm creasing rule, width 15mm)

     

     

  • C type (6pt creasing rule, width 15mm)

     

     

  • D type (8pt creasing rule, width 15mm)

     

     

G-Tape (creasing matrix)

Flute type Creasing rule 3pt (1.0mm) 4pt (1.4mm) 6pt (2.0mm) 8pt (3.0mm) Recommended creasing rule
AB double flute Diecut from bottom side B-1050 *C-1060 *D-1070 22.2×6/8pt

* Thickness of G-Tape = thickness of compressed paper
* Crease width = thickness of compressed paper x 2.2 + thickness of creasing rule

*Recommended size
**This is standard setting. It might be needed to adjust sizes depending on paper material, dieboard and machine condition.

  • B type (4pt 1.4mm creasing rule, width 15mm)

     

     

  • C type (6pt creasing rule, width 15mm)

     

     

  • D type (8pt creasing rule, width 15mm)

     

     

G-Tape (creasing matrix)

SHOP

  • CATALOG DOWNLOAD
  • CONTACT US
error: Content is protected !!