DAISO | G-Tape creasing matrix

G-Tape setting calculation

Cardboard

Please select paper thickness.

Measure the material thickness =
Paper thickness Creasing rule (mm)【A】 G-Tape Thickness【B】 Creasing width【C】
0.063-0.065mm GSM 50g 2pt (0.7) x 23.5 A-0308 0.3 0.8

* Thickness of G-Tape = height of cutting knife – height of creasing rule
* Crease width = thickness of paper x 2 + thickness of creasing rule

** This is standard setting. It might be needed to adjust sizes depending on paper material, dieboard and machine condition.

  • A type (2-3pt 0.7-1.0mm creasing rule, width 10mm)

     

     

G-Tape (creasing matrix)

Paper thickness Creasing rule (mm)【A】 G-Tape Thickness【B】 Creasing width【C】
0.22-0.23mm GSM 180g 2pt (0.7) x 23.4 A-0410 0.4 1.0

* Thickness of G-Tape = height of cutting knife – height of creasing rule
* Crease width = thickness of paper x 2 + thickness of creasing rule

** This is standard setting. It might be needed to adjust sizes depending on paper material, dieboard and machine condition.

  • A type (2-3pt 0.7-1.0mm creasing rule, width 10mm)

     

     

G-Tape (creasing matrix)

Paper thickness Creasing rule (mm)【A】 G-Tape Thickness【B】 Creasing width【C】
0.26-0.27mm GSM 200g 2pt (0.7) x 23.4 A-0412 0.4 1.2

* Thickness of G-Tape = height of cutting knife – height of creasing rule
* Crease width = thickness of paper x 2 + thickness of creasing rule

** This is standard setting. It might be needed to adjust sizes depending on paper material, dieboard and machine condition.

  • A type (2-3pt 0.7-1.0mm creasing rule, width 10mm)

     

     

G-Tape (creasing matrix)

Paper thickness Creasing rule (mm)【A】 G-Tape Thickness【B】 Creasing width【C】
0.29-0.30mm GSM 230g 2pt (0.7) x 23.4 A-0413 0.4 1.3

* Thickness of G-Tape = height of cutting knife – height of creasing rule
* Crease width = thickness of paper x 2 + thickness of creasing rule

** This is standard setting. It might be needed to adjust sizes depending on paper material, dieboard and machine condition.

  • A type (2-3pt 0.7-1.0mm creasing rule, width 10mm)

     

     

G-Tape (creasing matrix)

Paper thickness Creasing rule (mm)【A】 G-Tape Thickness【B】 Creasing width【C】
0.34-0.35mm GSM 270g 2pt (0.7) x 23.4 A-0414 0.4 1.4

* Thickness of G-Tape = height of cutting knife – height of creasing rule
* Crease width = thickness of paper x 2 + thickness of creasing rule

** This is standard setting. It might be needed to adjust sizes depending on paper material, dieboard and machine condition.

  • A type (2-3pt 0.7-1.0mm creasing rule, width 10mm)

     

     

G-Tape (creasing matrix)

Paper thickness Creasing rule (mm)【A】 G-Tape Thickness【B】 Creasing width【C】
0.39-0.40mm GSM 300g 2pt (0.7) x 23.3 A-0515 0.5 1.5

* Thickness of G-Tape = height of cutting knife – height of creasing rule
* Crease width = thickness of paper x 2 + thickness of creasing rule

** This is standard setting. It might be needed to adjust sizes depending on paper material, dieboard and machine condition.

  • A type (2-3pt 0.7-1.0mm creasing rule, width 10mm)

     

     

G-Tape (creasing matrix)

Paper thickness Creasing rule (mm)【A】 G-Tape Thickness【B】 Creasing width【C】
0.44-0.46mm GSM 350g 2pt (0.7) x 23.3 A-0516 0.5 1.6
3pt (1.0) x 23.3 A-0519 0.5 1.9

* Thickness of G-Tape = height of cutting knife – height of creasing rule
* Crease width = thickness of paper x 2 + thickness of creasing rule

** This is standard setting. It might be needed to adjust sizes depending on paper material, dieboard and machine condition.

  • A type (2-3pt 0.7-1.0mm creasing rule, width 10mm)

     

     

G-Tape (creasing matrix)

Paper thickness Creasing rule (mm)【A】 G-Tape Thickness【B】 Creasing width【C】
0.50-0.52mm GSM 400g 2pt (0.7) x 23.2 A-0517 0.5 1.7
3pt (1.0) x 23.2 A-0520 0.5 2.0

* Thickness of G-Tape = height of cutting knife – height of creasing rule
* Crease width = thickness of paper x 2 + thickness of creasing rule

** This is standard setting. It might be needed to adjust sizes depending on paper material, dieboard and machine condition.

  • A type (2-3pt 0.7-1.0mm creasing rule, width 10mm)

     

     

G-Tape (creasing matrix)

Paper thickness Creasing rule (mm)【A】 G-Tape Thickness【B】 Creasing width【C】
0.57-0.59mm GSM 450g 2pt (0.7) x 23.2 A-0519 0.5 1.9
3pt (1.0) x 23.2 A-0522 0.5 2.2

* Thickness of G-Tape = height of cutting knife – height of creasing rule
* Crease width = thickness of paper x 2 + thickness of creasing rule

** This is standard setting. It might be needed to adjust sizes depending on paper material, dieboard and machine condition.

  • A type (2-3pt 0.7-1.0mm creasing rule, width 10mm)

     

     

G-Tape (creasing matrix)

Paper thickness Creasing rule (mm)【A】 G-Tape Thickness【B】 Creasing width【C】
0.63-0.65mm GSM 500g 2pt (0.7) x 23.2 A-0520 0.5 2.0
3pt (1.0) x 23.2 A-0522 0.5 2.2

* Thickness of G-Tape = height of cutting knife – height of creasing rule
* Crease width = thickness of paper x 2 + thickness of creasing rule

** This is standard setting. It might be needed to adjust sizes depending on paper material, dieboard and machine condition.

  • A type (2-3pt 0.7-1.0mm creasing rule, width 10mm)

     

     

G-Tape (creasing matrix)

Paper thickness Creasing rule (mm)【A】 G-Tape Thickness【B】 Creasing width【C】
0.70-0.72mm GSM 550g 3pt (1.0) x 23.1 A-0624 0.6 2.4
4pt (1.4) x 23.1 B-0627 0.6 2.7

* Thickness of G-Tape = height of cutting knife – height of creasing rule
* Crease width = thickness of paper x 2 + thickness of creasing rule

** This is standard setting. It might be needed to adjust sizes depending on paper material, dieboard and machine condition.

  • A type (2-3pt 0.7-1.0mm creasing rule, width 10mm)

     

     

  • B type (4pt 1.4mm creasing rule, width 15mm)

     

     

G-Tape (creasing matrix)

Paper thickness Creasing rule (mm)【A】 G-Tape Thickness【B】 Creasing width【C】
0.76-0.78mm GSM 600g 3pt (1.0) x 23.0 A-0825 0.8 2.5
4pt (1.4) x 23.0 B-0830 0.8 3.0

* Thickness of G-Tape = height of cutting knife – height of creasing rule
* Crease width = thickness of paper x 2 + thickness of creasing rule

** This is standard setting. It might be needed to adjust sizes depending on paper material, dieboard and machine condition.

  • A type (2-3pt 0.7-1.0mm creasing rule, width 10mm)

     

     

  • B type (4pt 1.4mm creasing rule, width 15mm)

     

     

G-Tape (creasing matrix)

SHOP

  • CATALOG DOWNLOAD
  • CONTACT US